2022.03.20 15:51 Joanne_69 GayPornofFortnite
2013.06.30 19:04 CricketPinata RetroGear
2012.07.29 02:33 SpecialKayla Lady Boners Gone Cuddly! ❤
2023.05.28 04:57 Tiny_Dot5042 [WTS] oppressor,warden,and extras
2023.05.28 04:56 Eathanemem This is not gay porn you fucking normies
submitted by Eathanemem to Admin_Studios [link] [comments]
2023.05.28 04:51 Junior_Button5882 11 Terrifying-But-True Horror Stories Reported in the News - From fatal exorcisms to unexplained deaths and devil worship—these are some real-life nightmares.
His companions found him stabbed in the chest—an apparently self-inflicted wound—called 9-1-1, and Laursen was brought to a nearby hospital before being helicoptered to Creighton University Medical Center in Omaha.The Montgomery County Sheriff’s Office said Laursen suffered the self-inflicted injury at about 12:45 a.m., which is around the same time the 1912 axe murders in the house began.
The doll recited phrases from the movie Frozen and sang “Let It Go” when a button on its necklace was pressed.The family decided to throw the creepy doll out in December of 2019. Weeks later, they found it inside a bench in their living room. “The kids insisted they didn’t put it there, and I believed them because they wouldn’t have dug through the garbage outside,” Madonia told KPRC2 Houston News.
“For two years it did that in English,” mother Emily Madonia said. “In 2015, it started doing it alternating between Spanish and English. There wasn’t a button that changed these, it was just random."
The family has owned the doll for more than six years and never changed its batteries. The mother says the doll would randomly begin to speak and sing even with its switch turned off.
“The family then set about attempting to ‘cure’ Kennedy through restraint and prayer over the next three days, the court was told.”His brother, Colin Ife, told police:
“It’s clear that thing was in him, what we believed was a demon because it was not natural. It was clearly trying to kill him,” he said.Kennedy Ife had been bound to his bed for three days without medical attention when his brother called emergency services, explaining that Kennedy Ife was complaining of dehydration. He appeared to have developed breathing issues, and was pronounced dead at 10:17 a.m.
“We had to restrain him for himself. It was clear if we didn’t restrain him, he could have tried to harm people in our family.”
While police were at the house Colin Ife allegedly carried out an “attempted resurrection” by chanting and praying for Mr. Ife.All seven of Kennedy Ife’s family members were accused of manslaughter, false imprisonment, and causing or allowing the death of a vulnerable adult. A post-mortem examination revealed over 60 wounds including a possible bite on Kennedy Ife’s body, and his father, Kenneth Ife, along with four of his brothers, sustained injuries as well.
Kenneth Ife told jurors he ordered his sons to take shifts and use "overwhelming force" but denied that an "association with cults, occults and secret societies" played any part in the death.After a four day jury deliberation, all seven family members were cleared of charges on March 14, 2019.
The dead animals were wrapped in newspapers from the 1930s and 40s and were among half-used spices, and other items.The expert attributed the rotting animals in their walls to Pow-wow or Dutch magic, a ritual originating in the culture of the Pennsylvania Dutch to treat ailments and gain physical and spiritual protection. The Pennsylvania Dutch were a group of German-speaking settlers to Pennsylvania in the 1600 and 1700’s, and are often of Lutheran, Mennonite, or Amish faiths.
After removing the items they sent hundreds of artifacts and carcasses to an expert in Kutztown.
Many of the spells deal with the care of livestock, finding water, or the treatment of minor ailments, reflecting the conditions and concerns of early American settlers.One notable ritual in their tradition is this hex to create loyalty in a dog:
But powwow also has within it a tradition of darker spells, and even of such things as conjuring demons.
To attach a dog to a person, provided nothing else was used before to effect it: Try to draw some of your blood, and let the dog eat it along with his food, and he will stay with you.The mold found on the rotting carcasses in the Bretzuis home has caused illness among the family members, and they say that the odor hasn’t gone away.
Danielle Harkins told the kids they needed to rid their bodies of demons as the group gathered before dusk Saturday around a small fire near the St. Petersburg Pier. They should cut their skin to let the evil spirits out, police said she told the children. Then, they needed to burn the wounds to ensure that those spirits would not return.The police were notified because a friend of one of the students who participated in the ritual raised alarms. However none of the students themselves told their parents about the event or would comment following the arrest of Harkins for aggravated battery and child abuse.
When Harkins held a lighter to one teen's hand, wind blew the flame out, police said. That prompted her to douse his hand in perfume before setting it on fire. The boy suffered second-degree burns, police said.
Another teen was cut on the neck with a broken bottle, police said. Harkins used a flame to heat a small key, which she then used to cauterize the wound.
Investigators said they've spoken to Harkins, but she didn't spell out what type of religion would require such drastic measures.
"She hasn't informed us exactly what she was trying to accomplish with this," Puetz [of the St. Petersburg Police Department] said.
"The shower was awful," said Sabina Baugh, who spent eight days there during the investigation. "When you turned the tap on, the water was coming black first for two seconds and then it was going back to normal."The tap water "tasted horrible," Baugh said. "It had a very funny, sweety, disgusting taste. It's a very strange taste. I can barely describe it."But for a week, they never complained. "We never thought anything of it," she said. "We thought it was just the way it was here."On the morning of February 19, a hotel employee climbed to the roof and used a ladder to investigate the hotel's water storage tanks. That's where authorities found the decomposing, naked body of Lam, whose personal items were found nearby. After an autopsy, her death was labeled accidental. NBC Los Angeles reported at the time about the strange circumstances in the hotel's past:
The tank has a metal latch that can be opened, but authorities said access to the roof is secured with an alarm and lock.The single-room-occupancy hotel has an unusual history. "Night Stalker" Richard Ramirez, who was found guilty of 14 slayings in the 1980s, lived on the 14th floor for several months in 1985. And international serial killer Jack Unterweger is suspected of murdering three prostitutes during the time he lived there in 1991. He killed himself in jail in 1994.In 1962, a female occupant jumped out of one the hotel's windows, killing herself and a pedestrian on whom she landed.In February 2021, a Netflix doc called Crime Scene: The Vanishing at the Cecil Hotel explored Elisa's tragic case and the history of the "cursed" Cecil Hotel.
According to Washington's original DCS report—an account corroborated by Walker, the nurse—the 9-year-old had a "weird grin" and walked backward up a wall to the ceiling. He then flipped over Campbell, landing on his feet. He never let go of his grandmother's hand.Another segment of the piece reads:
The 12-year-old would later tell mental health professionals that she sometimes felt as if she were being choked and held down so she couldn't speak or move. She said she heard a voice say she'd never see her family again and wouldn't live another 20 minutes.This content is imported from youTube. You may be able to find the same content in another format, or you may be able to find more information, at their web site.Watch on📷Advertisement - Continue Reading Below
Friends and family told police that the parents were worried about the "evil in the world" and wanted to escape a "pending apocalypse." But most assumed they just wanted to move somewhere "off the grid." Investigators also found letters written by Kristi Strack to one of the state's most infamous convicted killers, Dan Lafferty, who was convicted in the 1984 fatal stabbing of his sister-in-law and her 1-year-old daughter. According to trial testimony, he killed the victims at the order of his brother, Ron Lafferty, who claimed to have had a revelation from God. The story became a book called "Under the Banner of Heaven."Police said Kristi Strack became friends with Dan Lafferty, and she and her husband even visited him in prison.
The families say the calls come in at all hours of the night, threatening to kill their children, their pets and grandparents. Voice mails arrive, playing recordings of their private conversations, including one with a local police detective.The caller knows, the families said, what they're wearing and what they're doing. And after months of investigating, police seem powerless to stop them.This went on with the Kuykenall family for months, who reported a caller with a scratchy voice threatening to slit their throats.
When the Fircrest, Wash., police tried to find the culprit, the calls were traced back to the Kuykendalls' own phones -- even when they were turned off.It got worse. The Kuykendalls and two other Fircrest families told ABC News that they believe the callers are using their cell phones to spy on them. They say the hackers know their every move: where they are, what they're doing and what they're wearing. The callers have recorded private conversations, the families and police said, including a meeting with a local detective.
Since moving in, the owners said they have received numerous letters from the mysterious person. "The Watcher" claimed the home "has been the subject of my family for decades," and "I have been put in charge of watching and waiting for its second coming," Castro reported.The new owners have several children, and other letters asked, "Have they found out what's in the walls yet?" and "I am pleased to know your names now, and the name of the young blood you have brought to me."The family was forced to flee from their home and later filed a lawsuit against the previous owners.
2023.05.28 04:45 Lyucifur Ender 3 V2 Under-extrusion Issues? (Info in body)
![]() | A little backstory and the issues that have lead up to this point. submitted by Lyucifur to 3Dprinting [link] [comments] I bought a new PLA+ Spool from 3DPO (I've exclusively used CCDIY PLA+ up until this point), Until this point my printer has worked fairly reliably for years, Minus a few aesthetic issues with the carborundum bed, general maintenance (PTFE Tube, Nozzles, etc.) and a fan that grenaded and threw little bits of plastic across my room. But this is a new issue and I'm not sure how to tackle it. It started with a clicking noise, And then prints started failing. They'd work fine for a few hours and then suddenly, Click, Click, Click.. The extruder was sorta stretching the filament out (but only PAST the extruder? The stuff coming off the spool was fine.) until the extruder could no longer reliably push the filament, and thus the clicking, Extruder skipping. One thing lead to another and it turns out my capricorn tubing had somehow MELTED AND CLOGGED MY HOT END? (I run my PLA+ at 215 head 70 bed °c.), So I replaced my capricorn tubing (making sure to do the fix to ensure proper leak-free contact with the hot end), completely cleaned out my hot end (With isopropyl alcohol and some q-tips after a cold pull failed multiple times), replaced the nozzle and reassembled everything. Adjusted my extruder aswell to try and reduce tension on the filament. So, After all of that, I've been running benchys to try and recalibrate after the first benchy came out half printed (Looked almost like a sponge lol, Still skipping on the extruder on that first print) After SEVERAL benchys it's alot better, Found out my spool was putting too much tension on the extruder, due to it being made of some kinda clear acrylic instead of the good old black plastic the ccdiy spools were made of so I added some silicon oil to the spool holder to reduce friction (also relubed my up axis while I was at it) and that.. sort of worked, Only an occasional click here and there now as it skips, much to my dismay. But no amount of tweaking and software modifications and stuff have fixed this issue and honestly I'm stumped at this point. What's up with the weird shrinking/under-extrusion on the benchys base? Why does the base come out like spider web? Why is the quality of the whole thing so.. bad? My prints used to come out pretty much ready for paint and now they're garbage! I'm extremely irritated at this issue. Sorry for the wall of text, I felt some background was necessary. Please help! |
2023.05.28 04:40 OceanRadioGuy I need a linear self-learning plan for statistics and calc 1
2023.05.28 04:38 Xndj91 Wife on Friends Cock: Free Amateur Porn Video fe
![]() | submitted by Xndj91 to Fhdu [link] [comments] |
2023.05.28 04:36 jthomas219744 Mustang fans thoughts on owning a tribute1970 boss 302?
![]() | Hey everyone, new to this sub! I finally got my Mustang three weeks ago so felt I could be part of the club now. submitted by jthomas219744 to Mustang [link] [comments] So I’m a huge classic car fan but have only been able to have “cash car” classics, back before I had a wife and kids (MGB, TR6, K Ghia- that $5k or less range back in the late 1980s - mid 1990s). I’m 50 now, the kids are out of college and on their own and I was able to convince my wife that buying a classic car at a fair price would be fun as hell and is a better investment than other more traditional investments (don’t want to discuss that subject here, would love to focus on mustangs). I am NOT a mechanic but have a few good contacts that can help along with YouTube so was looking for something than ran ok, but mainly just needed some work on her looks so I could afford her. I had $40k cash saved up so that was my max all-in TTL, shipping. I knew I wanted either - 1. 1972 corvette Stingray (most affordable/doable in my price range) or - 2. 1969/70 mustang fastback. I was looking at base fastbacks that were not restored much and was still surprised how much $ they were. Then came across this beauty and bought her immediately without ever meeting her in person. Felt comfortable with the seller and have not been disappointed. She’s a 1970 fastback and the previous owner put in a actual Boss 302 engine and badged her a Boss 302. Rust free, sounds great, and drives pretty well (just got her a few weeks ago and not a ton of free time yet) so we are in that getting-to-know-each-other phase engine wise. She’s just a beauty on the outside. Interior wise the seats are great, carpet is fantastic, headliner is great and that’s where it ends. No gauges work, no radio, wires hanging, sail panels falling out and lights gone, etc, and WORST THING of all she has a 4 speed automatic transmission…..Sorry for the long backstory and for throwing parentheses around so much. Now to my question I’d love you mustang fanatics and purists feedback on since you are a different breed (compliment). I love this car and love the fact it has that real 302 boss engine in it and could care less the VIN (and auto transmission which I will have changed when I save up enough money) makes this a fake Boss- the power and sound compared to base engine model- but do you ultimate mustang fans view this as a “joke” in a way because it’s not a real boss? Wondering what kind of reactions to expect if I join/do any mustang club things and if it’s better to take that Boss badging off her. Does not matter to me as I did not badge her, I just wanted a 1970 fastback with a great engine. Would really appreciate some feedback! |
2023.05.28 04:35 series33 Any males attracted to penis but not men?
2023.05.28 04:35 Nervous_Hunter_7267 Just doing a little bit of prep ^_^
![]() | submitted by Nervous_Hunter_7267 to 196 [link] [comments] |
2023.05.28 04:34 Xndj91 Sexy Arab: Free Amateur Porn Video 9a
![]() | submitted by Xndj91 to Fhdu [link] [comments] |
2023.05.28 04:32 Xndj91 Identical Teens Fuck Their Boss Free Porn 62:
![]() | submitted by Xndj91 to Fhdu [link] [comments] |
2023.05.28 04:29 jaylof93 28 [M4A] Hosting all night 😈 Get with a freak who will actually meet up and make you nut 💦 Love to suck, edge, eat ass and more! Westchase (77077)
2023.05.28 04:28 Xndj91 Hot Fuck Hidden Cam Free Hidden Fuck Porn
![]() | submitted by Xndj91 to Fhdu [link] [comments] |
2023.05.28 04:27 Amazing-Scarcity737 My Experience
2023.05.28 04:27 TheLastRiceGrain Making/applying black wash isn’t as easy as I thought it would be..
![]() | Hey everyone. I’m new to mini painting as well as painting itself. I primed my figure with flat gray spray primer and then painted my figure. (1:18 American Diorama Mechanic) All went well up until it was time for me to try to ‘wash’ my figure. I made a black wash with a couple drops of Vallejo acrylic black paint and some water in a little medicine cup. Then I realized when watching a video on YouTube that I should also be adding a drop of dish washing soap to help the paint flow into the crevices. So I added one drop into the little medicine cup. I’m not sure if my ratio with watepaint/drop of soap is off that’s causing these marks or if it’s how I’m applying it or both. What am I doing wrong? Any advice would be greatly appreciated. Also, if anyone has any tips or things I should know as a beginner in this hobby, feel free to let me know! Thanks in advance! submitted by TheLastRiceGrain to minipainting [link] [comments] |
2023.05.28 04:23 Xndj91 Voyeur Free Amateur Softcore Porn Video
![]() | submitted by Xndj91 to Hkbk [link] [comments] |
2023.05.28 04:20 dj8119 MILF in Action: Free Mature HD Porn
![]() | submitted by dj8119 to Hkbk [link] [comments] |
2023.05.28 04:13 throwaway10312901 [USA-CA][H] FREE custom i3 style 3d printer, Corsair K90 keyboard, water cooling loop (EK, swiftech, etc.,), Motorola Atrix dock, Asus VN248H-P, Monoprice monitor arm [W] Local, Nothing
Item | Description |
---|---|
Custom i3 prusa style printer | I built this when I was in highschool but its basically an i3 prusa style printer from the original i3 model plans (shortly after mendel). Most of the fittings are 3d printed, it works but will need work and great for someone looking to get into the hobby and learn about the history of 3d printing and what we have now. There is an LCD screen with rotary encoder, running some old ass version of marlin, a hall effect sensor for the z stop. Happy to throw in some old spools of ABS that may or may not still be good to use. |
Corsair K90 mechanical keyboard | I got this for free many years back so just passing it along. Cherry reds, wrist rest (rubber has degraded), i think one of the led's don't light up but otherwise perfectly functional. |
Water cooling loop | I think its a swift tech rad + fans?, EK something CPU water block, D5 pump, a bitspower something res that has since split and primochill white tubing (i think) (also has extra) |
Motorola Atrix dock | Got this for the raspberry pi stuff i was doing at the time, tried to resolder mico hdmi to full size hdmi but failed. |
Monitor arm | I think its monoprice? comes with whatever screws and mounting options that I have in the bag (it should be everything) |
Asus VN248H-P 1080p monitor | Tried giving this away last time but had too many people flake. Refer to: https://www.reddit.com/hardwareswap/comments/10weblj/usacah_asus_24_1080p_monitor_w_free_local/ TL;DR it works but has some weird backlight issues on the bottom of the screen |
2023.05.28 04:07 jd81jd Identical Teens Fuck Their Boss Free Porn 62:
![]() | submitted by jd81jd to Fhdu [link] [comments] |
2023.05.28 04:05 jd81jd Hot Arab Brunette Amazing Blowjob - FreeVipPorn.com
![]() | submitted by jd81jd to Fhdu [link] [comments] |
2023.05.28 04:01 jd81jd Creampie Free Creampie Porn Video
![]() | submitted by jd81jd to Hkbk [link] [comments] |
2023.05.28 04:01 RedditRitingRith Timely for preparing a memorial--Will DVDs made via a Sharp DV-RW55 ability to create a DVD from a VHS tape, be able to easily be turned into MP4 on Windows 10 (and with no audio vs video delay, in aong video)?